Replace regular light bulbs with compact fluorescent lamps. They use only a quarter of the energy. Most takes place a little 'more than ordinary light bulbs, but they will still fit in many lamps.
Fluorescent tubes are used to being criticized flickering, bluish light emanating. But now we are able to fluorescent lights, which are almost identical in color and warm light bulbs.
For very small lights, you want to sub-compact fluorescent lamps, whichbe easy to find on the site.
Now you can even compact fluorescent bulbs, which will work in 3-way.
A word of warning: never a compact fluorescent bulb in a circuit with a dimmer unless the bulb specifically designed to be adjustable.
Standards and installation of energy saving lamps
Protection classes
Protection
Ignition Protection
The installation in the bathrooms
Rated for commercial lighting
InstallationInstructions
Security Certificate
Electro-technical requirements, protection class
Compliance with safety standards and other
Luminaires should not only look good and have good light, but must also be safe. Safety is ensured by maintaining a series of regulations and standards. Lights, all national and international regulations.
Protection against electric shock
Each luminaire is insulated so that any exposed metalThe parties do not carry electrical current. Parts that carry current during normal operation must be protected against contact with either the insulation or a suitable cover. Additional measures are taken to the exposed metal parts of the energy management, even if preventing an insulation fault occurs. The table on the right contains three classes of protection used in Germany.
Unless otherwise indicated on the label, match equipment of protection class I
Protection against dust, solid materialsand water
Lamps have a particular degree of protection against moisture and dust they are exposed to belong. The protection than "covered", in other words, the lights no protection against moisture and dust, but in a way that is impossible to touch the electrical parts without tools is covered.
Lights without specifying a degree of protection IP 20 are classified. The following table provides an overview of safety classes, theirDefinitions and their symbols.
Installation requirements for lighting and private bathroom with VDE 0100 Part 701
As for protection against water, so the lamps must correspond with the types of protection given here. Impact protection and protection against solid parts must be at least IP 2X.
Zone 0
X7 devices with IP (eg IP 67) and rated voltage of 12 V. The lamps are designed for wet locations.
Zone 1
Devices with IPX4 (eg IP 44) and the nominal voltage to 25 V. IP X5 (eg IP 45) is used in showers with water at high pressure (eg, those with power showers) are required.
Zone 2
In Germany, the lamps must be IP X0 (eg IP 20) shall comply in all other European countries IPX1 (eg IP 21). All other electrical equipment in this zone must comply X1 IP.